Soldering

We, Drishti Electronics is considered as a foremost manufacturer of highly captivated in offering a comprehensive assortment of LED lights. Customers can avail these products from us at cost-effective rates.

Hanzhidao IslandsSolder gun instruction manualFeatures1. The solder gun is designed with a lightweight mechanism, which makes the work easier.2. High-quality heating core, longer working life. 3. Simple operation, easy to complete the welding work.4. Tin wire with a diameter of 0.8-1.5mm can be used.Instructions:1. Press down the tin inlet, insert the solder wire from the tin inlet, pull the trigger until the tin wireSend to the tin guide tube. 2. Plug the welding torch into the 220V power supply, turn on the power switch, and preheat it. 3. When the solder gun is heated enough, pull the trigger to start welding. 4. To withdraw the tin wire, just press the tin inlet and pull out the tin wire at the same time.5. When you need to replace the heating core, first remove the protective cover, remove the connecting wire of the heating core, and then remove the soldering iron tip to replace the old heating core.Precautions:1. The temperature of the soldering iron tube when the soldering iron is working is as high as 480-600 degrees, and people should not touch it2. The tin wire gun should be placed on its bracket when not in use. 3. It is forbidden to use solder guns in flammable and explosive places.4. It is forbidden to put the solder gun in a wet place, and it is forbidden to put it on children or children. 5. Please do not repair or disassemble the solder gun by yourself. If any parts or wires are damaged,can getThe place.Only personnel who are qualified to maintain electrical and electrical products can repair it.6. After the work is completed, turn off the power supply of the solder gun, and when it is completely cooled to room temperature,can be saved.

Hanzhidao Islands
:

1. Press down the tin inlet, insert the solder wire from the tin inlet, pull the trigger until the tin wire

Send to the tin guide tube. 2. Plug the welding torch into the 220V power supply, turn on the power switch, and preheat it. 3. When the solder gun is heated enough, pull the trigger to start welding. 4. To withdraw the tin wire, just press the tin inlet and pull out the tin wire at the same time.

5. When you need to replace the heating core, first remove the protective cover, remove the connecting wire of the heating core, and then remove the soldering iron tip to replace the old heating core.

Precautions:

1. The temperature of the soldering iron tube when the soldering iron is working is as high as 480-600 degrees, and people should not touch it

2. The tin wire gun should be placed on its bracket when not in use. 3. It is forbidden to use solder guns in flammable and explosive places.

4. It is forbidden to put the solder gun in a wet place, and it is forbidden to put it on children or children. 5. Please do not repair or disassemble the solder gun by yourself. If any parts or wires are damaged,

can get

The place.

Only personnel who are qualified to maintain electrical and electrical products can repair it.

6. After the work is completed, turn off the power supply of the solder gun, and when it is completely cooled to room temperature,

can be saved.

Hanzhidao

Weld Island

External heating type

80W

Internal heating

80W

adjustable temperature

Power switch control

①

Adjustable thermostat control ②

Tin window

③

Original internal heat heating core

④

adjusting screw

⑤

Precisely adjust the tin position

Bakon Newest 520W BK870A Digital Display SMD Hot Air Repair Desoldering Rework StationFeatures1.Smart body, saving working space.2.Convenient to adjust the temperature and air flow, suited for dismantle kinds of QFP, SOP, PLCC, SQJ chips etc.3.Eliminating or discharging the static by design so as to protect sensitive elements.4.Automatic cooling system to prevent the heater from high temperature.